![background image](http://html1.mh-extra.com/html/dannmar/mb-240x/mb-240x_installation-and-operation-manual_3431293029.webp)
MB-240X Wheel Balancer
29
P/N 5900262 — Rev. A1 — Jan. 2021
•
Rear-Cone Mounting
. Use this method if the Wheel you are balancing cannot be mounted with
Front-Cone Mounting. Refer to
Figure F
below.
The Spring goes on the Shaft first, then an appropriately sized Cone, the Wheel, the Quick Nut
Cup, and finally the Quick Nut.
•
Dual-Cone Mounting
. Generally used only for some aftermarket or OEM performance Wheels
that have a center hole that is deep enough to allow the use of two cones on the Shaft. Refer to
Figure G
below.
The Spring goes on the Shaft first, then an appropriately sized Cone, the Wheel, a second
appropriately sized Cone, and finally the Quick Nut.
Fig. F
Fig. G
Summary of Contents for MB-240X
