![background image](http://html1.mh-extra.com/html/dannmar/mb-240x/mb-240x_installation-and-operation-manual_3431293027.webp)
MB-240X Wheel Balancer
27
P/N 5900262 — Rev. A1 — Jan. 2021
About Measurements
To balance a Wheel correctly there are three Wheel
measurements that are important to understand:
•
Distance
. The distance from the side of the Balancer to the
Inner Edge of the Wheel. Measured by the Inner Arm.
•
Width
. The distance from the Inner Edge of the Wheel to the
Outer Edge. This value is measured and read off the Wheel caliper
supplied with the Balancer.
•
Diameter
. The distance from Wheel’s Outer Edge to Outer Edge
through the center. This value is read off the Tire side wall.
Summary of Contents for MB-240X
