D2-10 Series Two-Post Lifts
38
P/N 5900249 — Rev. B — February 2021
3.
Route the other end (the non-loop end) of the Safety Lock Cable under the Safety Sheave,
upwards on the inside of the Offside Post, up and over the Safety Sheave at the top of the Offside
Post, across the Overhead Assembly, over the Safety Sheave at the top of the Powerside Post,
and then downwards, on the inside of the Powerside Post, towards the Mounting Bracket.
Make sure the Safety Lock Cable stays on its Safety Sheaves; this keeps it out of the way of the
Equalizing Cables and the Hydraulic Hoses.
4.
On the Powerside Post
, when the non-loop end of the Safety Lock Cable is near the Mounting
Bracket, route it under the Safety Sheave, then push it out of the Powerside Post through a hole in
the Post.
The Powerside Safety Assembly is not yet installed, so just leave the non-loop end of the Safety
Lock Cable hanging out of the hole.
Important
: When connecting the ends of the Safety Lock Cable later in the installation, make
sure the Cable stays in all of the Safety Sheaves. This keeps it out of the way of the
Hydraulic Hoses and Equalizing Cables.
Both ends of the Safety Lock Cable will be connected during the procedure to install the Safety
Installing the Safety Assemblies
Installing the Safety Assemblies and the Safety Lock Cable
Your D2-10 Series Lift has two Safety Assemblies: one on the Powerside Post (above the Power Unit)
and the other on the Offside Post.
The two Safety Assemblies take the Lift off of its Safety Locks so the Lift Arms can be lowered. The
Safety Assemblies need to be disengaged at the same time so that the Lift Arms lower together. In
order to do this, the two Safety Assemblies are connected to each other via the Safety Lock Cable,
which is routed through the Overhead Assembly.
Routing the Safety Lock Cable was done earlier; refer to
additional information.
D2-10A
D2-10C
Pulley Plate
removed for
clarity.
Summary of Contents for D2-10 Series
