Dannmar D2-10 Series, Installation And Operation Manual

Page: 10 / 88

D2-10 Series Two-Post Lifts
10
P/N 5900249 — Rev. B — February 2021
Specifications
Model D2-10A D2-10C
Lifting Capacity 10,000 lbs / 4,536 kg
Maximum Capacity Front Axle 5,000 / 2,268 kg
Maximum Capacity Rear Axle 5,000 / 2,268 kg
A – Lowered Height with Pad 5" / 127 mm
B – Max. Lift Height (Top Lock) 78.5" / 1,994 mm
C
– Max. Rise 69" / 1,753 mm
D – Height Overall 145" / 3,683 mm
E
– Width Overall 143.5" / 3,645 mm 145.25” / 3,690 mm
F – Width Outside of Lift Posts 137.25” / 3,486 mm 137.25" / 3,486 mm
G
– Width Inside of Lift Posts 120.75" / 3,067 mm 118.25” / 3,004 mm
H – Drive-Thru Clearance 100” / 2,540 mm 106” / 2,692 mm
I
– Floor to Top Switch 141" / 3,581 mm 141” / 3,581 mm
J – (Front) Arm Reach (Min.) 29.25" / 743 mm 32.25” / 819 mm
J – (Front) Arm Reach (Max.)
43.75" / 1,111 mm 52.5” / 1,334 mm
K – (Approach) Arm Reach (Min) 40.25" / 1,022 mm 32.25” / 819 mm
K – (Approach) Arm Reach (Max.)
58" / 1,473 mm 52.5” / 1,334 mm
Time to Full Rise ~60-70 seconds
Power Unit 220 VAC, 30 Amp, 60 Hz, 1 Phase
Noise 45 dB
Shipping Weight 1,665 lbs. / 755.2 kg 1,470 lbs. / 666.8 kg
* Lifting Height w/Pad
is maximum lifting height with Pads at lowest height, no adapter.
Maximum
Lifting Height
is maximum lifting height with Pads at top height and with the 6 in. / 152 mm Adapter.
Specifications subject to change without notice.