D2-10 Series Two-Post Lifts
37
P/N 5900249 — Rev. B — February 2021
Installing the Safety System
The Safety Lock Cable and the Safety Lock Release Handle are used to release the Safety Locks,
allowing the Lift to be lowered.
The Safety Lock Cable connects to the Safety Assembly on the Offside Post, goes over the Overhead
Assembly, then to the Safety Assembly on the Powerside Post.
The following drawing shows the path the Safety Lock Cable travels from Safety Assembly on the
Offside Post to the Safety Assembly on the Powerside Post.
The following procedure describes how to put the Safety Lock Cable into place; it does
not
describe
how to attach it to the Safety Lock Releases.
⚠
WARNING
You will need to access the Overhead Assembly to route the Safety Lock Cable.
Use care to avoid falling when working on a ladder or other lifting device.
One end of the Safety Lock Cable has a loop on it, the other does not. The loop end must be installed
on the Offside Post, the other end on the Powerside Post.
Routing the Safety Lock Cable
1.
Locate the Safety Lock Cable.
The Safety Lock Cable is a long, thin steel cable with a loop on one end, no loop on the other end.
The two ends are
not
interchangeable.
Make sure to orient the Safety Lock Cable so that the loop end goes to the
Offside Post side of the Lift.
2.
Starting on the inside of the Offside Post
, push the loop end of the Safety Lock Cable out
through a hole in the Offside Post.
The Offside Safety Assembly is not yet installed, so just leave the loop end of the Safety Lock
hanging out of the hole.
Not to scale. Not all components shown. The Safety Assemblies are not installed at this point, so
the Safety Cable, after being routed, will simply stay in place until later in the installation.
Summary of Contents for D2-10 Series
