1 Introduction
1.1 Purpose of the Manual
This manual provides the information required to install
and set up communication using BACnet protocol.
First-time users can obtain the most essential information
for quick installation and set-up in these chapters
chapter 4 System Configuration
For more detailed information including the full range of
set-up options and diagnosis tools refer to the chapters:
VLT
®
is a registered trademark.
1.2 Additional Resources
Literature available:
•
VLT
®
DriveMotor FCP 106 and FCM 106 Operating
Instructions,
for information required to install and
commission the frequency converter.
•
VLT
®
DriveMotor FCP 106 and FCM 106 Design
Guide,
provides information required for
integration of the frequency converter into a
diversity of applications.
•
VLT
®
DriveMotor FCP 106 and FCM 106
Programming Guide
, for how to program the unit,
including complete parameter descriptions.
•
VLT
®
LCP Instruction
, for operation of the local
control panel (LCP).
•
VLT
®
LOP Instruction
, for operation of the local
operation pad (LOP).
•
Modbus RTU Operating Instructions
,
Operating
Instructions VLT
®
DriveMotor FCP 106 and FCM 106
BACnet
and
Operating Instructions VLT
®
DriveMotor
FCP 106 and FCM 106 Metasys
, for information
required for controlling, monitoring, and
programming the frequency converter.
•
PC-based Configuration Tool MCT 10,
enables
configuration of the frequency converter from a
Windows™ based PC environment.
•
Danfoss VLT
®
Energy Box
software, for energy
calculation in HVAC applications.
Technical literature and approvals are available online at
www.danfoss.com/BusinessAreas/DrivesSolutions/Documen-
tations/TeDocumentation.
Danfoss VLT
®
Energy Box software is available at
www.danfoss.com/BusinessAreas/DrivesSolutions
, PC software
download area.
1.3 Abbreviations and Conventions
ACI
Acyclical Control Interval
ACK
Acknowledge
ADF
Internal Floating Points
ADI
Internal Integers
AI
Analog Inputs
AO
Analog Outputs
AOC
Application Orientated Controller
AV
Analog Values
BI
Binary Inputs
BMS
Building Management System
BO
Binary Outputs
BV
Binary Values
COS
Change Of State
CTW
Control Word
EEPROM Electrical Erasable Programmable Read Only Memory
EIA
Electronic Industries Association: Specifies of the EIA
Standard RS-485-A
EMC
Electromagnetic Compatibility
HPFB
High Performance Field Bus
I/O
Input/Output
ISO
International Standards Organization
JCI
Johnson Controls Inc. developers of the METASYS N2
protocol
LCP
Local Control Panel
LED
Light Emitting Diode
MAV
Main Actual Value
MRV
Main Reference Value
N2
METASYS N2
N2
master
A N2 master is either a PC with JCI software or a
dedicated JCI controller
NAK
Not acknowledged
NPA
N2 Point Address (Each N2 Point Type has a address
range from 0 to 255)
NPT
N2 Point Type
PC
Personal Computer
PDU
Protocol Data Unit
PELV
Protected Extra Low Voltage
PLC
Programmable Logic Control
PNU
Parameter Number
STW
Status Word
Table 1.1 Abbreviations
Introduction
VLT
®
DriveMotor FCP 106 & FCM 106 BACnet Operating Instructions
MG03O102 - Danfoss A/S
©
12/2013. All rights reserved.
3
1
1
Summary of Contents for VLT DriveMotor FCP 106
Page 2: ......