Danfoss VLT AutomationDrive FC 302, Operating Manual, Page: 18 / 158

4 Mechanical Installation
4.1 Items Supplied
Items supplied can vary according to product configu-
ration.
•
Make sure the items supplied and the information
on the nameplate correspond to the order confir-
mation.
Illustration 4.1 and Illustration 4.2 show
sample nameplates for a D-sized drive either with
or without an extended options cabinet.
•
Check the packaging and the drive visually for
damage caused by inappropriate handling during
shipment. File any claim for damage with the
carrier. Retain damaged parts for clarification.
OUT: 3x0-Vin 0-590Hz 480/443 A
IN: 3x380-500V 50/60Hz 463/427 A
250 kW / 350 HP, High Overload
OUT: 3x0-Vin 0-590Hz 588/535 A
315 kW / 450 HP, Normal Overload
VLT
T/C: FC-302N250T5E20H2XGCXXXSXXXXAXBPCXXXXDX
P/N: 136G0205 S/N:
123456H058
R
AutomationDrive
www.danfoss.com
e30bg282.10
IN: 3x380-500V 50/60Hz 567/516 A
ASSEMBLED IN USA
Tamb. 45
C/113 F at Full Output Current
CHASSIS/IP20
SCCR 100 kA at UL Voltage range 380-500 V
Listed 36U0 E70524 IND. CONT. EQ.
UL Voltage range 380-500 V
CAUTION - ATTENTION:
Stored charge, wait 20 min.
Charge residuelle, attendez 20 min.
See manual for special condition / mains fuse
Voir manuel de conditions speciales / fusibles
WARNING - AVERTISSEMENT:
`
`
1
2
3
4
5
6
Danfoss A/S
6430 Nordborg
Denmark
089
1 Type code
2 Part number and serial number
3 Power rating
4 Input voltage, frequency, and current
5 Output voltage, frequency, and current
6 Discharge time
Illustration 4.1 Example Nameplate for Drive Only (D1h–D4h)
OUT: 3x0-Vin 0-590Hz 480/443 A
IN: 3x380-500V 50/60Hz 463/427 A
250 kW / 350 HP, High Overload
OUT: 3x0-Vin 0-590Hz 588/535 A
315 kW / 450 HP, Normal Overload
VLT
T/C: FC-302N250T5E54H2XGC3XXSXXXXALBXCXXXXDX
P/N: 134L8251 S/N:
123456H123
R
AutomationDrive
www.danfoss.com
e30bg281.10
IN: 3x380-500V 50/60Hz 567/516 A
ASSEMBLED IN USA
Tamb. 45 C/113 F at Full Output Current
Type 12 / IP54
SCCR 100 kA at UL Voltage range 380-500 V
Listed 36U0 E70524 IND. CONT. EQ.
UL Voltage range 380-500 V
CAUTION - ATTENTION:
Stored charge, wait 20 min.
Charge residuelle, attendez 20 min.
See manual for special condition / mains fuse
Voir manuel de conditions speciales / fusibles
WARNING - AVERTISSEMENT:
`
`
1
2
3
4
5
6
Danfoss A/S
6430 Nordborg
Denmark
Use the following Typecode to order Drive-only replacement:
T/C: FC-302N250T5E54H2XGC7XXSXXXXALBXCXXXXDX
1 Type code
2 Part number and serial number
3 Power rating
4 Input voltage, frequency, and current
5 Output voltage, frequency, and current
6 Discharge time
Illustration 4.2 Example Nameplate for Drive with Extended
Options Cabinet (D5h–D8h)
NOTICE
LOSS OF WARRANTY
Do not remove the nameplate from the drive. Removing
the nameplate can result in loss of warranty.
Mechanical Installation VLT® AutomationDrive FC 302
16 Danfoss A/S © 09/2018 All rights reserved. MG34U502
4 4