[2157]
Ext. 3 Reference [Unit]
The value of the reference for extended Closed Loop Controller 3
[2158]
Ext. 3 Feedback [Unit]
The value of the feedback signal for extended Closed Loop Controller 3
[2159]
Ext. Output [%]
The value of the output from extended Closed Loop Controller 3
[2230]
No-Flow Power
The calculated No Flow Power for the actual operating speed
[2580]
Cascade Status
Status for the operation of the Cascade Controller
[2581]
Pump Status
Status for the operation of each individual pump controlled by the Cascade Controller
[2791]
Cascade Reference
Reference output for use with follower drives.
[2792]
% Of Total Capacity
Readout parameter to show the system operating point as a % capacity of total system capacity.
[2793]
Cascade Option Status
Readout parameter to show the status of the cascade system.
NB!
Please consult the
VLT
®
AQUA Drive Programming Guide, MG.20.OX.YY
for detailed information.
0-21 Display Line 1.2 Small
Option:
Function:
Select a variable for display in line 1, middle position.
[1662] *
Analog input 53
The options are the same as those listed for par. 0-20
Display Line 1.1 Small
.
0-22 Display Line 1.3 Small
Option:
Function:
Select a variable for display in line 1, right position.
[1614] *
Motor Current
The options are the same as those listed for par. 0-20
Display Line 1.1 Small
.
0-23 Display Line 2 Large
Option:
Function:
Select a variable for display in line 2. The options are the same as those listed for par. 0-20
Display
Line 1.1 Small
.
[1615] *
Frequency
0-24 Display Line 3 Large
Option:
Function:
[1652] *
Feedback [Unit]
Select a variable for display in line 2. The options are the same as those listed for par. 0-20
Display
Line 1.1 Small
.
0-37 Display Text 1
Range:
Function:
0 N/A*
[0 - 0 N/A]
In this parameter it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 1 in par. 0-20
Display
Line 1.1 Small
, par. 0-21
Display Line 1.2 Small
, par. 0-22
Display Line 1.3 Small
, par. 0-23
Display
Line 2 Large
or par. 0-24
Display Line 3 Large
. Use the
▲
or
▼
buttons on the LCP to change a
character. Use the
◀
and
▶
buttons to move the cursor. When a character is highlighted by the
cursor, it can be changed. Use the
▲
or
▼
buttons on the LCP to change a character. A character
can be inserted by placing the cursor between two characters and pressing
▲
or
▼
.
VLT AQUA High Power Operation Instructions
5 How to programme the frequency converter
MG.20.P3.02 - VLT
®
is a registered Danfoss trademark
103
5