manualshive.com logo in svg

Danfoss VLT AQUA Drive Series, Design Manual, Page: 86 / 204

Share
Download
Danfoss VLT AQUA Drive Series Design Manual Download Page 86

3.7.4 Floor Mounting - Pedestal Installation IP21 (NEMA1) and IP54 (NEMA12)

Install the pedestal on the floor. Fixing holes are to be drilled according
to this figure:

Illustration 3.35: Drill master for fixing holes in floor.

Mount the drive on the pedestal and fix it with the included bolts to the
pedestal as shown on the illustration.

Illustration 3.36: Mounting of drive to pedestal

NB!

Please see the 

Pedestal Kit Instruction Manual, 175R5642

, for further information.

 

3.7.5 Input Plate Option

This section is for the field installation of input option kits available for frequency converters in all D and E frames.
Do not attempt to remove RFI filters from input plates. Damage may occur to RFI filters if they are removed from the input plate.

3 VLT AQUA Selection

VLT

®

 AQUA Drive Design Guide

86

MG.20.N5.02 - VLT

®

 is a registered Danfoss trademark

3  

Summary of Contents for VLT AQUA Drive Series













































































































































































































Reviews:

No comments