5.3.8 Access to Control Terminals
All terminals to the control cables are located underneath the terminal cover on the front of the frequency converter. Remove the terminal cover by means
of a screwdriver (see illustration).
Illustration 5.17: Frame sizes A1, A2, A3,B3, B4, C3 and C4
Illustration 5.18: Frame sizes A5, B1, B2, C1 and C2
5.3.9 Control Terminals
Drawing reference numbers:
1.
10 pole plug digital I/O.
2.
3 pole plug RS485 Bus.
3.
6 pole analog I/O.
4.
USB Connection.
Illustration 5.19: Control terminals (all enclosures)
5.3.10 Control Cable Terminals
To mount the cable to the terminal:
1.
Strip isolation of 9-10 mm
2.
Insert a screw driver
1)
in the square hole.
3.
Insert the cable in the adjacent circular hole.
4.
Remove the screw driver. The cable is now mounted to the ter-
minal.
To remove the cable from the terminal:
1.
Insert a screw driver
1)
in the square hole.
2.
Pull out the cable.
5 How to Install
VLT
®
AQUA Drive Design Guide
130
MG.20.N5.02 - VLT
®
is a registered Danfoss trademark
5
