2.
Open MCT 10 Set-up Software
3.
Choose “Read from drive”
4.
Choose “Save as”
All parameters are now stored in the PC.
Load Frequency Converter Settings:
1.
Connect a PC to the frequency converter via USB com port
2.
Open MCT 10 Set-up software
3.
Choose “Open”– stored files will be shown
4.
Open the appropriate file
5.
Choose “Write to drive”
All parameter settings are now transferred to the frequency converter.
A separate manual forMCT 10 Set-up Software is available:
MG.10.Rx.yy
.
The MCT 10 Set-up Software Modules
The following modules are included in the software package:
MCT Set-up 10 Software
Setting parameters
Copy to and from frequency converters
Documentation and print out of parameter settings incl. diagrams
Ext. User Interface
Preventive Maintenance Schedule
Clock settings
Timed Action Programming
Smart Logic Controller Set-up
Ordering number:
Please order the CD containing MCT 10 Set-up Software using code number 130B1000.
MCT 10 can also be downloaded from the Danfoss Internet:
WWW.DANFOSS.COM, Business Area: Motion Controls
.
7. How to operate the frequency converter
VLT
®
AQUA Drive
Operating Instructions
62
MG.20.M5.02 - VLT
®
is a registered Danfoss trademark
7
