29-05 Filled Setpoint
Range:
Function:
0 s*
[0 – 999999,999 s]
Specifies the Filled Set-point at which the Pipe Fill Function will be disabled and the PID controller
will take control. This function can be used both for horizontal and vertical pipe systems.
8.3. Parameter Options
8.3.1. Default settings
Changes during operation:
”TRUE” means that the parameter can be changed while the frequency converter is in operation and “FALSE” means that the frequency converter must
be stopped before a change can be made.
4-Set-up:
'All set-up': the parameter can be set individually in each of the four set-ups, i. e. one single parameter can have four different data values.
’1 set-up’: data value will be the same in all set-ups.
SR:
Size related
N/A:
No default value available.
Conversion index:
This number refers to a conversion figure used when writing or reading by means of a frequency converter.
Conv. index
100
67
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
Conv. factor
1
1/60
1000000
100000
10000
1000
100
10
1
0.1
0.01
0.001
0.0001
0.00001
0.000001
Data type
Description
Type
2
Integer 8
Int8
3
Integer 16
Int16
4
Integer 32
Int32
5
Unsigned 8
Uint8
6
Unsigned 16
Uint16
7
Unsigned 32
Uint32
9
Visible String
VisStr
33
Normalized value 2 bytes
N2
35
Bit sequence of 16 boolean variables
V2
54
Time difference w/o date
TimD
8. How to programme the frequency converter
VLT
®
AQUA Drive
Operating Instructions
108
MG.20.M5.02 - VLT
®
is a registered Danfoss trademark
8
