23-04 Occurrence
Array [10]
Option:
Function:
Select which day(s) the Timed Action applies to. Specify working/non-working days in par.
0-81 Working
Days
, par. 0-82 Additional
Working Days
and par. 0-83 Additional
Non-Working
Days
.
[0] *
All days
[1]
Working days
[2]
Non-working days
[3]
Monday
[4]
Tuesday
[5]
Wednesday
[6]
Thursday
[7]
Friday
[8]
Saturday
[9]
Sunday
8.2.12. Water Application Functions, 29-**
The group contains parameters used for monitoring water / wastewater applications.
29-00 Pipe Fill Enable
Option:
Function:
[0] *
Disabled
Select Enabled to fill pipes at a user specified rate.
[1]
Enabled
Select Enabled to fill pipes with a user specified rate.
29-01 Pipe Fill Speed [RPM]
Range:
Function:
Speed Low
Limit*
[Speed Low Limit - Speed High Lim-
it]
Set the filling speed for filling horizontal pipe systems. The speed can be selected in Hz or RPM
depending on the choices made in par. 4-11 / par. 4-13 (RPM) or in par. 4-12 / par. 4-14 (Hz).
29-02 Pipe Fill Speed [Hz]
Range:
Function:
Motor
Speed Low
Limit*
[Speed Low Limit - Speed High Lim-
it]
Set the filling speed for filling horizontal pipe systems. The speed can be selected in Hz or RPM
depending on the choices made in par. 4-11 / par. 4-13 (RPM) or in par. 4-12 / par. 4-14 (Hz).
29-03 Pipe Fill Time
Range:
Function:
0 s*
[0 - 3600 s]
Set the specified time for pipe filling of horizontal pipe systems.
29-04 Pipe Fill Rate
Range:
Function:
0.001 units/
s*
[0.001 – 999999.999 units/s]
Specifies the filling rate in units/second using the PI controller. Filling rate units are feedback units/
second. This function is used for filling-up vertical pipe systems but will be active when the filling-
time has expired, no matter what , until the pipe fill-set-point set in par. 29-05 is reached.
VLT
®
AQUA Drive
Operating Instructions
8. How to programme the frequency converter
MG.20.M5.02 - VLT
®
is a registered Danfoss trademark
107
8
