6.1.8 Parameter Selection
In main menu mode, the parameters are divided into groups. Select a parameter group with the navigation keys.
The following parameter groups are accessible:
Group
Title
Function
0-**
Operation/Display
Parameters related to the fundamental functions of the filter, function of the LCP
buttons and configuration of the LCP display.
5-**
Digital In/Out
Parameter group for configuring the digital inputs and outputs.
8-**
Communication and Options
Parameter group for configuring communications and options.
14-**
Special Functions
Parameter group for configuring special filter functions.
15-**
Unit Information
Parameter group containing filter information such as operating data, hardware
configuration, and software versions.
16-**
Data Readouts
Parameter group for data readouts, e.g. actual references, voltages, control, alarm,
warning and status words.
300-**
AF Settings
Parameter group for setting the active filter. Apart from par. 300-10, Active Filter
Nominal Voltage, it is not recommended to change the settings of this parameter
group.
301-**
AF Readouts
Parameter group for the filter readouts.
Table 6.1 Parameter groups
After selecting a parameter group, choose a parameter with the navigation keys.
The middle section on the GLCP display shows the parameter number and name, as well as the selected parameter value.
How to Program
VLT Active Filter AAF 00x
MG.90.V2.22 - VLT
®
is a registered Danfoss trademark
6-3
6
6
