Danfoss VACON NX FI4, Operating Manual

Page: 5 / 166

8.4 Using the Keypad Control Menu 73
8.4.1 Finding the Keypad Control Menu 73
8.4.2 Keypad Control Parameters M3 74
8.4.3 Changing the Control Mode 74
8.4.4 Changing the Rotation Direction 75
8.4.5 Disabling the Stop Motor Function 75
8.4.6 Special Functions in Keypad Control Menu 76
8.4.6.1 Selecting the Keypad as the Control Mode 76
8.4.6.2 Copying the Frequency Reference Set to the Control Panel 76
8.5 Using the Active Faults Menu (M4) 76
8.5.1 Finding the Active Faults Menu 76
8.5.2 Examining the Fault Time Data Record 77
8.5.3 Fault Time Data Record 77
8.6 Using the Fault History Menu (M5) 78
8.6.1 Fault History Menu (M5) 78
8.6.2 Resetting the Fault History 79
8.7 Using the System Menu (M6) 79
8.7.1 Finding the System Menu 79
8.7.2 System Menu Functions 79
8.7.3 Changing the Language 82
8.7.4 Changing the Application 82
8.7.5 Copy Parameters (S6.3) 83
8.7.5.1 Saving Parameter Sets (Parameter Sets S6.3.1) 83
8.7.5.2 Uploading Parameters to Control Panel (Up To Keypad, S6.3.2) 84
8.7.5.3 Downloading Parameters to Drive (Down From Keypad, S6.3.3) 84
8.7.5.4 Activating or Deactivating the Automatic Parameter Back-up (P6.3.4) 84
8.7.5.5 Comparing the Parameters 85
8.7.6 Security 86
8.7.6.1 Finding the Security Menu 86
8.7.6.2 Passwords 86
8.7.6.3 Setting a Password 86
8.7.6.4 Entering a Password 87
8.7.6.5 Deactivating the Password Function 87
8.7.6.6 Locking a Parameter 87
8.7.6.7 Start-up Wizard (P6.5.3) 88
8.7.6.8 Activating/Deactivating the Start-up Wizard 88
8.7.6.9 Enabling/Disabling the Change of Multimonitoring Items 88
8.7.7 Keypad Settings 89
8.7.7.1 Finding the Keypad Settings Menu 89
8.7.7.2 Changing the Default Page 89
8.7.7.3 Default Page in the Operating Menu (P6.6.2) 90
8.7.7.4 Setting the Timeout Time 90
Contents Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / | 5 Danfoss A/S © 2019.07