12.10.66 Fault 22 - Parameter fault, Subcode S6 - Application-defined power-down, variable
checksum
Cause
Parameter save fault.
•
Operation malfunction
•
defective component
Troubleshooting
If the fault occurs again, ask instructions from the local distributor.
12.10.67 Fault 22 - Parameter fault, Subcode S10 - System parameter checksum error
Cause
Parameter save fault.
•
Operation malfunction
•
defective component
Troubleshooting
If the fault occurs again, ask instructions from the local distributor.
12.10.68 Fault 22 - Parameter fault, Subcode S13 - Checksum error in application-specific parameter
set
Cause
Parameter save fault.
Troubleshooting
•
Recommission the application.
•
Check parameters.
12.10.69 Fault 24 - Counter fault
Cause
Values that showed on the counters are incorrect.
Troubleshooting
Have a critical attitude towards values shown on counters.
Specifications
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908| 143
Danfoss A/S © 2019.07
Summary of Contents for VACON NX FI4
Page 1: ...Operating Guide VACON NX Inverters FI4 FI8...
Page 2: ......
