Procedure
1.
In the
Keypad control
menu (
M3
), find the control mode (
Control Place
) with Menu buttons Up and Down.
READY
STOP
I/O term
e
3
0
b
g
0
3
4
.1
0
Control Place
I/O Terminal
2.
To go to the edit mode, push the Menu button Right.
The parameter value starts to blink.
3.
To scroll through the options, push the Browser buttons Up and Down.
4.
To select the control mode, push the [enter] button.
8.4.4 Changing the Rotation Direction
Context:
The keypad direction submenu shows the rotation direction of the motor. In this submenu, also the rotation direction can be changed.
For more information on how to control the motor with the control panel, see
9.2 Commissioning the Inverter
Procedure
1.
In the
Keypad control
menu (
M3
), find the Keypad direction with the Menu buttons Up and Down.
2.
To go to the edit mode, push the Menu button Right.
3.
Select the direction with Menu buttons Up and Down.
The rotation direction changes on the control panel.
4.
To make the motor to agree with the set rotation direction, select the keypad as the control mode, see
8.4.5 Disabling the Stop Motor Function
Context:
As a default, the motor stops when the Stop button is pushed no matter what is the control mode. Use these instructions to disable
this function.
Procedure
1.
In the
Keypad control
menu (
M3
), find the page 3.4. Stop button with the Browser buttons.
2.
To go to the edit mode, push the Menu button Right.
3.
To select Yes or No, use the Browser buttons.
4.
Accept the selection with the [enter] button.
When the Stop motor function is not active, the Stop button stops the motor only when the keypad is the control mode.
Using the Control Panel
Operating Guide | VACON® NX Inverters FI4-FI8
AQ299433367205en-000101 / DPD00908| 75
Danfoss A/S © 2019.07
Summary of Contents for VACON NX FI4
Page 1: ...Operating Guide VACON NX Inverters FI4 FI8...
Page 2: ......
