Danfoss OX024-x10, User Manual

Page: 6 / 16

Inputs – DOut Output Status
The input status of output pins on connectors and pins C1p06, C1p07, C1p08, and C1p09 is described.
Signal Type Direction Range Description
Pin _Status
Bus —— ——
PinStatus U16 Input 0 – 1 Output pin status
0: OK
1: Overload detected. Only detected when DigOut = True.
Updated BOOL Input —— True when the PinStatus signal is refreshed.
Inputs – DOut/PVG Pwr Output Status
The input status of output voltage and output status on connectors and pins C1p10 and C1p11 is
described.
Signal Type Direction Range Description
Pin _Status
Bus —— ——
Volt U16 Input 0 – 36000 Output pin voltage
100 is 100 mV.
PinStatus U16 Input 0 – 1 Output pin status
0: OK
1: Overload detected . Only detected when DigOut = True.
Updated BOOL
Input —— True when the Volt and PinStatus signals are refreshed.
Inputs – MFOut Output Status
The input status of multifunction outputs on connectors and pins C1p12, C2p01, C2p02, C2p03, C2p04,
C2p05, C2p06, C2p07, C2p08, and C2p09 is described.
Signal Type Direction Range Description
Pin _Status Bus —— ——
FeedBackValue S16
Input -32768 –
32767 Measured current flowing through the output pin.
1000 is 100 mA.
PinStatus U16
Input 0 – 2 Output pin status.
0: OK.
1: Incorrect pin configuration.
2: Overload detected.
Updated BOOL Input —— True when the FeedBackValue and PinStatus signals are refreshed.
Outputs – Group
The status for two groups of outputs is described.
A pin group is for C1p12, C2p01, C2p02 and C2p03.
Another pin group is for C2p05, C2p06, C2p07 and C2p08.
User Manual
PLUS+1® Compliant OX024-x10 Function Block
OX024-x10 Function Block
6 | © Danfoss | July 2018 11063395 | AQ00000104en-US0101