Danfoss MCB 113, Operating Manual

Page: 44 / 54

Option Function
[105] Torque rel to rated
motor torque 0–
20 mA The torque is related to the motor torque setting.
[106] Power 0–20 mA Taken from parameter 1-20 Motor Power [kW] .
[107] Speed 0–20 mA Taken from parameter 3-03 Maximum Reference . 20 mA = value in parameter 3-03 Maximum Reference .
[108] Torque ref. 0–
20 mA Torque reference related to 160% torque.
[109] Max. out freq 0–
20 mA In relation to parameter 4-19 Max Output Frequency .
[130] Output freq. 4–
20 mA 0 Hz = 4 mA, 100 Hz = 20 mA.
[131] Reference 4–
20 mA Parameter 3-00 Reference Range [0] Min.–Max. 0% = 4 mA; 100% = 20 mA. Parameter 3-00 Reference
Range [1] -Max.–+Max. -100% = 4 mA; 0% = 12 mA; +100% = 20 mA.
[132] Feedback 4–
20 mA
[133] Motor cur. 4–
20 mA The value is taken from parameter 16-37 Inv. Max. Current . The inverter maximum current (160% cur-
rent) is equal to 20 mA. Example: Inverter normal current (11 kW) = 24 A. 160% = 38.4 A. Motor nor-
mal current = 22 A, readout 11.46 mA.
16 mA � 22 �
38 . 4 �
= 9 . 17 mA
If the normal motor current is equal to 20 mA, the output setting of parameter 6-52 Terminal 42 Output
Max Scale is:
�
VLT, Max
× 100
�
Motor, Norm
= 38 . 4 × 100
22
= 175 %
[134] Torque % lim. 4–
20 mA The torque setting is related to the setting in parameter 4-16 Torque Limit Motor Mode .
[135] Torque % nom 4–
20 mA The torque setting is related to the motor torque setting.
[136] Power 4–20 mA Taken from parameter 1-20 Motor Power [kW] .
[137] Speed 4–20 mA Taken from parameter 3-03 Maximum Reference . 20 mA = value in parameter 3-03 Maximum Reference .
[138] Torque 4–20 mA Torque reference related to 160% torque.
[139] Bus ctrl. 0–20 mA An output value set from fieldbus process data. The output works independently of internal functions
in the drive.
[140] Bus ctrl. 4–20 mA An output value set from fieldbus process data. The output works independently of internal functions
in the drive.
[141] Bus ctrl. 0–20 mA,
timeout Parameter 4-54 Warning Reference Low defines the behavior of the analog output if a fieldbus timeout
occurs.
[142] Bus ctrl. 4–20 mA,
timeout Parameter 4-54 Warning Reference Low defined the behavior of the analog output if a fieldbus timeout
occurs.
[150] Max. out freq 4–
20 mA In relation to parameter 4-19 Max Output Frequency .
Parameter Setup
Operating Guide | VLT® Extended Relay Card MCB 113
AQ322553864968en-000101 / 130R0353
44 | Danfoss A/S © 2020.01