Danfoss MCB 113, Operating Manual, Page: 17 / 54

Digital input function Select Terminal
Light-load detection [94] All
Evacuation [95] All
Mains loss [96] 32, 33
Mains loss inverse [97] 32, 33
Start edge triggered [98] All
Safety option reset [100] –
Enable master offset [108] All
Start virtual master [109] All
Start homing [110] All
Activate touch [111] All
Relative position [112] All
Enable reference [113] All
Sync. to Pos. mode [114] All
Home sensor [115] 18, 32, 33
Home sensor inverse [116] 18, 32, 33
Touch sensor [117] 18, 32, 33
Touch sensor inverse [118] 18, 32, 33
Speed mode [119] All
Power limit mot. [231] All
Power limit gen. [232] All
Power limit both [233] All
Light load + evacuation [234] All
The standard terminals of the drive are:
•
18
• 19
• 27
• 29
• 32
• 33
In all drive series, except for VLT® AutomationDrive FC 301, terminals 27 and 29 also function as an output.
The VLT® Extended Relay Card MCB 113 option has the following terminals:
Analog outputs
•
X45/1
• X45/3
Digital inputs
Parameter Setup
Operating Guide | VLT® Extended Relay Card MCB 113
AQ322553864968en-000101 / 130R0353| 17
Danfoss A/S © 2020.01