FCM 300 Series
MG.03.B6.2G - VLT is a registered Danfoss trademark
Danfoss PC software for serial communication
All FCM 300 Series units come standard with an RS
485 port to communicate with a PC using Danofss
VLT
®
Dialog Software (see page 7-3).
Ordering numbers, VLT
®
Software Dialog
VLT
®
Software Dialog
175Z0953
Incl Basic, Logging, Template, Guided tour modules in 6
languages (Danish, English, German, Italian, Spanish and
French)
Accessories for the FC motor
A Local Operation Pad (LOP) for local set point and
start/stop is available for the FC motor. The LOP is
IP 66 enclosed. A Local Control Panel (LCP 2) which
makes up a complete interface for operation,
programming and monitoring of the FC motor is also
available.
Ordering numbers, accessories
Local Operation Pad (LOP)
175N0128
Local Control Panel (LCP 2)
175N0131
Remote mounting kit (LCP 2)
175N0160
Plug kit (LCP 2)
175N0161
Cable for plug kit (LCP 2)
175N0162
Cable (direct mounting) (LCP 2)
175N0165
Service plug kit (LCP 2)
175N0166
4-5
Ordering
PG 16 to ½" NPT adapter
176H9207
PG 21 to 3/4" NPT adapter
176H9208
