FC 300 CANopen
- T r o u b l e s h o o t i n g -
MG.33.J1.02 VER. 050301 – VLT is a registered Danfoss trademark
53
Error LED / Module Status (MS) LED, red
No
LED state
device state
description
1
Off
no error
no error
2 single
flash
warning
limit
reached
CAN error counter(s) has
reached / exceeded warning
level
3
Flickering
autobaud
autobaud in progress
4
double flash error control event
guard event (NMT slave) or
heartbeat event (heartbeat
consumer) has occurred
5
triple flash
sync error
sync message has not been
received within configured
timeout (object 0x1006)
6
On
bus off
bus off
If more than 1 error has occurred, the one with the highest number will be displayed.
Run LED / Network Status (NS) LED, green
No
LED state
Device state
Description
1
flickering
Auto Baud
auto baud active
2
single flash
stopped
device is in stopped state
3
blinking
pre-operational
device is in pre-operational
state
4
on
operational
device is in operational state
Other states
State
MS LED
NS LED
COP initialize error
solid red
solid red
wait for AOC
red/green blinking
red/green blinking
