0-20 Display Line 1.1 Small
Option:
Function:
[2230]
No-Flow Power The calculated No Flow Power for the
actual operating speed
[2316]
Maintenance
Text
[2580]
Cascade Status Status for the operation of the Cascade
Controller
[2581]
Pump Status
Status for the operation of each individ-
ual pump controlled by the Cascade
Controller
[3110]
Bypass Status
Word
[3111]
Bypass
Running Hours
[9913]
Idle time
[9914]
Paramdb
requests in
queue
[9920]
HS Temp. (PC1)
[9921]
HS Temp. (PC2)
[9922]
HS Temp. (PC3)
[9923]
HS Temp. (PC4)
[9924]
HS Temp. (PC5)
[9925]
HS Temp. (PC6)
[9926]
HS Temp. (PC7)
[9927]
HS Temp. (PC8)
NOTE
Please consult the
VLT HVAC Drive Programming Guide,
MG.11.CX.YY
for detailed information.
0-21 Display Line 1.2 Small
Select a variable for display in line 1, middle position.
Option:
Function:
[1614]
*
Motor Current The options are the same as those listed
in par. 0-20
Display Line 1.1 Small
.
0-22 Display Line 1.3 Small
Select a variable for display in line 1, right position.
Option:
Function:
[1610]
*
Power [kW] The options are the same as those listed in
par. 0-20
Display Line 1.1 Small
.
0-23 Display Line 2 Large
Select a variable for display in line 2.
Option:
Function:
[1613]
*
Frequency The options are the same as those listed in
par. 0-20
Display Line 1.1 Small
.
0-24 Display Line 3 Large
Select a variable for display in line 3.
Option:
Function:
[1502]
*
kWh Counter The options are the same as those listed in
par. 0-20
Display Line 1.1 Small
.
0-37 Display Text 1
Range:
Function:
0
*
[0 -
0 ]
In this parameter it is possible to write an individual text
string for display in the LCP or to be read via serial
communication. If to be displayed permanently select
Display Text 1 in par. 0-20
Display Line 1.1 Small
,
par. 0-21
Display Line 1.2 Small
, par. 0-22
Display Line 1.3
Small
, par. 0-23
Display Line 2 Large
or par. 0-24
Display
Line 3 Large
. Use the [
▲
] or [
▼
] buttons on the LCP to
change a character. Use the [
◀
] and [
▶
] buttons to
move the cursor. When a character is highlighted by the
cursor, it can be changed. Use the [
▲
] or [
▼
] buttons on
the LCP to change a character. A character can be
inserted by placing the cursor between two characters
and pressing [
▲
] or [
▼
].
0-38 Display Text 2
Range:
Function:
0
*
[0 -
0 ]
In this parameter it is possible to write an individual text
string for display in the LCP or to be read via serial
communication. If to be displayed permanently select
Display Text 2 in par. 0-20
Display Line 1.1 Small
,
par. 0-21
Display Line 1.2 Small
, par. 0-22
Display Line 1.3
Small
, par. 0-23
Display Line 2 Large
or par. 0-24
Display
Line 3 Large
. Use the [
▲
] or [
▼
] buttons on the LCP to
change a character. Use the [
◀
] and [
▶
] buttons to
move the cursor. When a character is highlighted by the
cursor, this character can be changed. A character can
be inserted by placing the cursor between two charac-
ters and pressing [
▲
] or [
▼
].
0-39 Display Text 3
Range:
Function:
0
*
[0 -
0 ]
In this parameter it is possible to write an individual text
string for display in the LCP or to be read via serial
communication. If to be displayed permanently select
Display Text 3 in par. 0-20
Display Line 1.1
Small
,par. 0-21
Display Line 1.2 Small
, par. 0-22
Display
Line 1.3 Small
, par. 0-23
Display Line 2 Large
or
par. 0-24
Display Line 3 Large
. Use the [
▲
] or [
▼
] buttons
on the LCP to change a character. Use the [
◀
] and [
▶
]
buttons to move the cursor. When a character is
highlighted by the cursor, this character can be
changed. A character can be inserted by placing the
cursor between two characters and pressing [
▲
] or [
▼
].
How to Programme the Frequ...
VLT
®
HVAC Drive Operating Instructions
68
MG.11.AD.02 - VLT
®
is a registered Danfoss trademark
7
7