Foundation basis
8.1 fig
For bigger than 12m
2
arch greenhouse
TITAN Arch 320
, additional crossbars are
used to strengthen arches (8.2 fig.).
If length of the greenhouse is 6 m – fastenings to the arches – crossbars are attached:
(No. 5) + (No. 6).
If length of the greenhouse is 8 m – fastenings to the arches – crossbars are attached:
(No. 5) + (No. 5).
If length of the greenhouse is 10 m – fastenings to the arches – crossbars are attached:
(No. 5) + (No. 5) + (No. 6).
8.2 fig
9. To the front and back arches you should screw fastening angles of the stilt and
polycarbonate. On the each side you should use 9 pcs small angles (23) and 2 pcs big
angles (22).
Positions of angles measuring from the foundation from left to right (Measured with
upright angle) (9.1 - 9.3 fig.):
1) 5 cm big angle (22). Narrow part to the front
2) 83 cm small angle (23). Wide part to the front
3) 109 cm small angle (23). Wide part to the front
4) 170 cm small angle (23). Wide part to the front
5) 196 cm small angle (23). Wide part to the front
6) 202 cm small angle (23). Wide part to the front
7) 196 cm small angle (23). Wide part to the front
8) 170 cm small angle (23). Wide part to the front
9) 109 cm small angle (23). Wide part to the front
8