18.2 fig
19. Based on the given scheme, cut the poly-
carbonate (5;6;7;8;9)
Polycarbonate parts of the door window
must be fitted only when the door hinges
are attached to the framework of the green-
house.
Polycarbonate sheets of door – window are
attached with screws M5-12 (16) and inter-
nal screws M5 (19) and gasket slides (20) to
the door frame.
Polycarbonate ends of the door-window
must be sealed with protective band for seal-
ing plates (25). Join handles (21) to its place
(19 fig.). Make a hole in polycarbinate sheet
with sharp knife. Cut X shaped holes oppo-
site the metal holes. Make a hole from the
outside of the cover.
20. Screw the screw with loop (27) on its place on
the same level as the door handle. Make a loop
from the given plastic door opening handle (26)
(20 fig.).
19 fig
20 fig
14