Scheme for cutting polycarbonate
Correctly separate sides of the polycarbonate. Attach the side with UV
protection to the outside. UV protection layer is covered with the tape with note
signs, while other side (attaching to the inside) is covered with the clear sheet.
YOU MUST USE GLOVES WHILE CUTTING! It is recommended to cut sheet
with electric disc saw, saw or sharp knife.
ATTENTION! If you received 2,10x6,00 m sheets and additionally 1,05x2,00 m, you
shouldn‘t cut big sheets like it is shown in the scheme.
Big 2,10x6,00 m sheets are used for roof , 1,05x2,00 m sheets are used for ends, door
and window. Follow the measurements shown in the table “Dimensions of polycar-
bonate“
-1-; -2-; -3-; -4-; Side parts
-5- The top part of the door
-6- Bottom part of the door
-7- Windоw
-8- Bottom of the window
-9- Upper polycarbonate of
the window of the door
4