14 fig
15. If sides of the polycarbonate are over the framework of arches, cut them along the
carcass. Place gum to seal gap between the wall and the roof (28) on the top of the
sheets and only then place upper part of the polycarbonate ( -10- 2100x6000mm) (15
fig).
15 fig
16. Top parts (10) should be placed from the bottom to the top along the one side. Poly-
carbonate is attached with screws M5-12 (16) and internal screws M5 (19) and gasket
slides (20). On one band of the arch are are 5 (five) attachment points. Attach ONLY
on those points. Another side must be attached from the top to the bottom. If the sheet
of polycarbonate is too long, cut it along the foundation basis (11). The front and back
polycarbonate sheets should be flush with the edges of the foundation (16 fig.).
12