Piranha HS-S0-06K Camera User Manual
03-032-20213-01
Teledyne DALSA
54
Mnemonic
Syntax Parameters Description
get line average
gla
x x
Read the average of line sam p les.
x
= Pixel start nu m ber
x
= Pixel end nu m ber
In a range from
1
to
6000
.
Refer to Retu rning Averaged Lines of
Vid eo on p age 39 for d etails.
get p rnu coeff
gpc
x
Read the PRN U coefficient.
x
= p ixel nu m ber to read in a range
from
1
–
sensor pixel count
.
get signal frequ ency
gsf
help
h
Disp lay the online help . Refer to section
for d etails.
help , single com m and
?
s
load p ixel coefficients
lpc
Load s the p reviou sly saved p ixel
coefficients from non -volatile m em ory
w here
i
is:
0
= Factory calibrated coefficients
1
= Coefficient set one
2
= Coefficient set tw o
3
= Coefficient set three
4
= Coefficient set fou r
read bit error cou nter
rbc
reset cam era
rc
Reset the entire cam era (reboot). Bau d
rate is not reset and reboots w ith the
valu e last u sed .
restore factory settings
rfs
Restore the camera’s factory settings.
FPN and PRN U coefficients reset to 0.
Refer to section 3.4 Saving and
Restoring Settings for d etails.
region of interest
roi
x y x y
Sets the p ixel range affected by the
cag
,
gl
,
gla
,
ccf and cpa
com m and s.
The p aram eters are the p ixel start and
end valu es (
x
) and the colu m n start and
end valu es (
y
) in a range from
1
to
4096
. Refer to section Setting a Region
of Interest for d etails.
reset p ixel coeffs
rpc
Reset the p ixel coefficients to 0. Refer to
section Enabling and Disabling Pixel
Coefficients on p age 33 for d etails.
reset stats cou nter
rsc
restore u ser settings
rus
Restore the cam era's last saved u ser
settings and FPN and PRN U
coefficients. Refer to section 3.4 Saving
and Restoring Settings for d etails.
set ad d backgrou nd
sab
i
0 to 4096.
set ccd d irection
scd
i
Sets the CCD shift d irection w here:
0 =
Forw ard TDI shift d irection.
1 =
Reverse TDI shift d irection.
2 =
Externally controlled d irection.
