Dalsa Piranha Owner'S Manual Download Page 2 | Manualshive

Page: 2 / 60

background image

Piranha HS-S0-06K Camera User Manual

03-032-20213-01

Teledyne DALSA

2

© 2014 Teled yne DALSA. All inform ation p rovid ed  in this manual is believed  to be accu rate and  reliable.
N o resp onsibility is assu m ed  by Teled yne DALSA for its u se. Teled yne DALSA reserves the right to make
changes to this information w ithou t notice. Rep rod u ction  of this m anu al in w hole or in p art, by any
m eans, is p rohibited  w ithou t p rior p erm ission having been obtained  from  Teled yne DALSA.

About Teledyne Technologies and Teledyne D ALSA , Inc.

Teled yne Technologies is a lead ing p rovid er of sop histicated  electronic su bsystem s, instru m entation and
com m u nication p rod ucts, engineered  system s, aerosp ace engines, and  energy and  pow er generation
systems. Teled yne Technologies’ operations are primarily located  in the United States, the United
Kingd om and  Mexico. For m ore inform ation, visit Teled yne Technologies’ w ebsite at w w w .teled yne.com .

Teled yne DALSA, a Teled yne Technologies com pany, is an international lead er in high p erformance
d igital im aging and  sem icond u ctors w ith ap p roxim ately 1,000 em p loyees w orld w id e , head quartered  in
Waterloo, Ontario, Canad a. Established  in 1980, the com p any d esigns, d evelop s, m anu factu res and
m arkets d igital im aging p rod u cts and  solu tions, in ad d ition to p rovid ing MEMS p rod u cts and  services.
For m ore inform ation, visit Teled yne DALSA’s w ebsite at

w w w .teled yned alsa.com

Support

For further information not includ ed in this manual, or for information on Teled yne DALSA’s extensive
line of im age sensing p rod ucts, p lease contact:

N orth America

605 McMu rray Rd
Waterloo, ON N 2V 2E9
Canad a

Tel: 519 886 6000
Fax: 519 886 8023

w w w .teled yned alsa.com

sales.am ericas@teled yned alsa.com
su p p ort@teled yned alsa.com

Europe

Felix-Wankel-Str. 1
82152 Krailling
Germ any

Tel: +49 89 89 54 57 3-80
Fax: +49 89 89 54 57 3-46

w w w .teled yned alsa.com

sales.eu rop e@teled yned alsa.com
su p p ort@teled yned alsa.com

Asia Pacific

Ikebu ku ro East 13F
3-4-3 H igashi-Ikebu ku ro
Toshim a-ku , Tokyo 170-0013
Jap an

Tel: 81 3 5960 6353
Fax: 81 3 5960 6354

w w w .teled yned alsa.com

sales.asia@teled yned alsa.com
su p p ort@teled yned alsa.com

D ocument revised August 20, 2014.

«
1
2
3
4
...
»

Summary of Contents for Piranha





























































Reviews:

No comments

Related manuals for Piranha

DCS-1110 - Network Camera

Brand: D-Link Pages: 16

Brand: NcTech Pages: 9

Brand: Vigilate Pages: 2

Brand: AgfaPhoto Pages: 2

Brand: Lencarta Pages: 8

SMART CAMERA PIR BATTERY

Brand: Tesla Pages: 6

Brand: CamPro Pages: 14

Brand: Sungale Pages: 2

Brand: Commax Pages: 8

Brand: Yashica Pages: 13

fundus link 20D001

Brand: C-MER rainsoptics Pages: 28

Brand: Watchguard Pages: 32

Brand: Refco Pages: 32

Brand: Zavio Pages: 29

Brand: NextBase Pages: 58

ALIBI ALI-NS2112VR

Brand: Observint Pages: 7

Brand: Parkmate Pages: 4

AVerVision SPB370

Brand: Avermedia Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands