Dalsa P3-80-**k40-R, User Manual

Page: 60 / 91

Piranha 3 User Manual
03-032-10216-02 DALSA
60
Returning Camera Settings with Get Commands
You can also return individual camera settings by inserting a “
get”
in front of the
command that you want to query. If the command has a tap or pixel number parameter,
you must also insert the tap number or pixel number that you want to query. Refer to
Table 14 below for a list of available commands. To view a help screen listing the
following get commands, use the command
gh
.
Table 14: Get Commands
Syntax Parameters Description
get cao
t
Returns the analog offset for the tap indicated
t
= tap selection, either
1
to
8
, or
0
for all taps
get ccf
x1 x2
Returns the FPN pixel coefficients for the pixel range
indicated.
x1
= Pixel start number
x2
= Pixel end number
get ccp
x1 x2
Returns the PRNU pixel coefficients for the pixel range
indicated.
x1
= Pixel start number
x2
= Pixel end number
get clm
Returns the current Camera Link mode.
get css
Returns the number of line samples averaged for pixel
coefficient calculations or for output of
gla
command.
get els
Returns whether the end-of-line statistics are turned off or
on.
0
: Off
1
: On
get epc
Returns whether pixel coefficients are enabled or
disabled.
The first parameter returns the FPN coefficients setting
where:
0
= FPN coefficients disabled
1
= FPN coefficients enabled
The second parameter returns the PRNU coefficients
setting where:
0
= PRNU coefficients disabled
1
= PRNU coefficients enabled
get gcm
Returns the camera’s model number
get gcs
Returns the camera’s serial number
get gcv
Returns the camera’s software version.
get gfc
x
Returns the FPN pixel coefficient for the pixel indicated.
get gl
x1 x2
Returns pixel values for the pixel range specified.
get gla
x1 x2
Returns the average of the pixel range indicated.
get gsf
i
Returns the frequency of the Camera Link control signal
indicated, either
1
,
2
,
3
, or
4
.