Dalsa P3-80-**k40-R, User Manual

Page: 61 / 91

Piranha 3 User Manual
DALSA 03-032-10216-02
61
Syntax Parameters Description
get lpc
Returns the current coefficient set number.
get rfs
Returns whether factory settings have been saved. The
camera always returns
1
(factory settings have been
saved).
get roi
Returns the current region of interest.
get rus
Returns whether user settings have been saved.
0
= No user settings saved
1
= User settings have been saved
get sag
t
Returns the analog gain in dB for the tap indicated
t
= Tap value.
0
for all taps or
1
to
8
for individual tap
selection.
get sao
t
Returns the analog offset for the tap indicated.
t = 0
for all taps or
1
to
8
for individual tap selection.
get sbr
Returns the speed of camera serial communication port.
get sdo
t
Returns the digital offset value in DN for the tap
indicated.
t
= Tap value.
0
for all taps or
1
to
8
for individual tap
selection.
get sem
Returns the current exposure mode:
3 =
External SYNC, maximum exposure time
7 =
Internal programmable SYNC, maximum exposure
time. Factory setting.
get sfc
x
Returns the FPN coefficient for the pixel number idicated.
x
=pixel number within the range
1
to
sensor pixel
count
.
get sgr
Returns the current analog gain reference value in dB.
get slt
Returns the current lower threshold value.
get sot
Returns the Camera Link strobe rate.
get spc
x
Returns the PRNU coefficient for the specified pixel
number.
x
=pixel number within the range
1
to
sensor pixel
count
.
get spt
Returns the current pretrigger value.
get ssb
t
Returns the current background subtract value.
t
= Tap value.
0
for all taps or
1
to
8
for individual tap
selection.
get ssf
Returns the current line/frame rate in Hz.
get ssg
t
Returns the current digital gain setting.
t
= tap selection, either
1
to
8
, or
0
for all taps
get sut
Returns the current uppder threshold value.