Dalsa P3-80-**k40-R, User Manual

Page: 32 / 91

Piranha 3 User Manual
03-032-10216-02 DALSA
32
Table 12: Piranha3 Data Readout Configurations
Camera Link Mode Configuration (Controlled by
clm
command)
Command Camera Link
Configuration Camera Link Taps Camera Link
Data Rate Bit
Depth
clm 15
Medium 4 Camera Link taps
where:
1 = CCD tap 1+2
2 = CCD tap 3+4
3 = CCD tap 5+6
4 = CCD tap 7+8
Note: Concatenated
taps are interleaved.
Refer to section 1.3 for a
sensor readout
description.
80MHz 8
clm 16
Medium 4 Camera Link taps
where:
1 = CCD tap 1+2
2 = CCD tap 3+4
3 = CCD tap 5+6
4 = CCD tap 7+8
Note: Concatenated
taps are interleaved.
Refer to section 1.3 for a
sensor readout
description.
80MHz 12
clm 21
Full 8 Camera Link taps
where:
1 = CCD tap 1
2 = CCD tap 2
3 = CCD tap 3
4 = CCD tap 4
5 = CCD tap 5
6 = CCD tap 6
7 = CCD tap 7
8 = CCD tap 8 40MHz 8
3.3.2 Setting the Camera Throughput
Purpose: In DALSA cameras, the
sot
command works in conjunction with
the
clm
command (see above) and determines the throughput of the
camera. The Piranha3 currently only supports a throughput of
320
.
This may change in future cameras.
Syntax:
sot m
Syntax Elements:
m
Output throughput. Allowable value is:
320 =
4 taps at 80MHz or 8 taps at 40MHz