Dalsa P3-80-**k40-R, User Manual

Page: 16 / 91

Piranha 3 User Manual
03-032-10216-02 DALSA
16
!
Figure 3: Piranha3 Input and Output Connectors
Camera Link (Medium or Full Configuration)
Camera Link (Medium or Full Configuration)
Diagnostic LED
+12V to +15V and Ground
WARNING: It is extremely important that you apply the appropriate voltages to your camera.
Incorrect voltages will damage the camera. See section 2.4 for more details.
2.2.1 LED Status Indicator
The camera is equipped with a red/green LED used to display the operational status of
the camera. The table below summarizes the operating states of the camera and the
corresponding LED states.
When more than one condition is active, the LED indicates the condition with the highest
priority. Error and warning states are accompanied by corresponding messages further
describing the current camera status.
Table 5: Diagnostic LED
Color of Status LED Meaning
Flashing Green Camera initialization or executing a long command (e.g., flat field
correction commands
ccp
or
ccf
)
Solid Green Camera is operational and functioning correctly
Flashing Red Fatal Error. Camera temperature is too high and camera thermal
shutdown has occurred.
Solid Red Warning. Loss of functionality (e.g. external SRAM failure)