CamExpert Image Buffer and ROI Parameters
CamExpert provides controls to configure acquisitions via the Image Buffer and ROI
Parameters tab. The image buffer can be easily cropped as desired. Below is the CamExpert
dialog and parameter descriptions follow.
Parameter
Description
Pixel Format
For the Genie Monochrome series, the image buffer format is Monochrome
8-bit or 10-bit.
Width (in Pixels)
Displays the image buffer width (X axis), in pixels.
Height (in Pixels)
Displays the image buffer height (Y axis), in pixels.
OffsetX (in Pixels)
Specifies the offset in X, from the left of the image, when using an ROI. The
image buffer width is automatically adjusted to compensate for this offset.
OffsetY (in Lines)
Specifies the offset in Y, from the top of the image, when using an ROI. The
image buffer height is automatically adjusted to compensate for this offset.
Image Flip
Enables hardware based horizontal image flip.
Note: When operating in binning mode, the resolution is halved and the coordinate
system is scaled accordingly. For instance, an OffsetX of 20 pixels at nominal resolution is
equivalent to an OffsetX of 10 pixels with horizontal binning enabled.
48
•
Operational Reference
Genie Monochrome Series-GigE Vision Camera
