56
¾
Baudrate:
Default 9600.
¾
Speed:
PTZ turning speed.
¾
PTZ Addr:
Each PTZ has one different address. Default system configuration: 001.
Select “More..” to set data bit, stop bit and other parameters:
¾
RS-485 parameters:
Including baudrate, data bit, stop bit, parity bit, flow control, etc. These parameters
must be the same as those of PTZ Protocol.
¾
Vertical:
Reverse PTZ’s vertical field.
¾
Horization:
Reverse PTZ’s horizontal field.
In the course of setting up the parameters, if the parameters needed to be set the same in all channels, you can
select ‘
ALL
’ after finishing the setup of parameters of one channel. The system will pop-up a dialog box. When
pressing ‘
OK
’, parameters setup for all channels will be achieved.
Serial Port
Serial port parameters can be set in type
Ⅰ
16 channel model (page.6).
Enter “Main Menu
－
Advanced
－
Serial ” as shown in Fig.53.
Fig. 53
Setup parameters for 485(1)R+
、
R-: Including baud rate, data bit, stop bit, parity bit, flow control and so on,
they have to be consistent with parameters of connected series device(such as keyboard).
Note: External Keyboard can works only when it’s connected to R+,R- in 485(1) port.
PTZ can be controlled by RS485 or RS232 port in type
Ⅲ
model (page.6).
