40
¾
Idle time
：
Length of time during which no operation is executed. Default Idle time: 5 minute.
¾
Screen Saver:
This option is special for III type model( with LCD)
(page.6), and it can control LCD display time.
DVR will not get into power saving mode if the option is set as 000. And the default value is 5min.
¾
VGA Resolution
：
Setup VGA output resolution. There are following options: 800×600, 1024×768 and
1280×1024. Default: 1024×768.
Section 7
HDD Management
HDD State Inquiry
Enter “Main Menu
－
Rec.& Alarm—HDD” as shown in Fig. 32.
Fig. 32
Move cursor with
and
on the front panel and select item with
and
.
¾
Auto Overwrite:
Select it, and it will overwrite the earliest recording when HDD is full.
¾
HDD Alarm:
HDD alarm will activate once the capacity of HDD is lower than a value set by user. The
range of warning capacity is among 30 to 99. Alarm mode: buzzer alarm. Default buzzer time is 10 second
which can be modified in “Main Menu”
→
“Rec. &Alarm”
→
“Alarm”.
¾
HDD Format:
Select the HDD which will be formatted, press “Enter” key to get into HDD format interface
as shown in Fig. 33.
