57
Fig. 54 Fig.55
PTZ Port: You should select the “RS485” when the RS485 port is connected to PTZ; And you should select the
“RS232” when the RS232 port is connected.
When temperature or humidity transducer is connected, user can set the parameter in fig.55. If the display value is
inconsistent with the actual situation, user can adjust it by modify coefficient and correction.
Temperature or humidity value displayed =coefficient* value from tran correction.
PTZ Control
After the PTZ parameter is set, click “
” key on the status bar to enter PTZ control mode.
Fig. 56
In the interface, the direction, zoom, focus and Iris can be controlled.
Auto-cruise is in the middle of direction button.
¾
Set preset position
In PTZ control mode, select “Setup” to enter preset position setup dialog interface as shown in Fig.57.
