46
¾
Sensitivity
:
Select sensitivity of motion detection or video shelter. Option including: Highest, High,
Medium, Low, Lowest.
¾
Area Setup
:
Alarm area should also be set to activate motion detection or video shelter though such function
was selected.
In area setup interface, full screen is the default alarm area. In type
Ⅰ
4 channel model, type
Ⅱ
model and
type
Ⅲ
model (page.6), use direction key to move cursor, press
to cancel chose area, and press
to recover chose area. In type
Ⅰ
16 channel model (page.6), use direction key to move cursor, press number
“2” key to cancel chose area, and press number “1” key to recover chose area.
¾
Rec. CH
:
When alarm activated, relevant channel can be selected to record if recording period has been
setup in “Alarm Schedule” menu.
¾
Spot Camera:
The channel, which motion happened in, can be selected to display as full screen.
¾
Alarm Out
:
Activate alarm out or not.
¾
If you need open motion detect , the effective time can be setup in "schedule", detail refer to "
Schedule".
Note: “Sheltering” and “Video Loss” settings please refer to “Motion” setup.
Alarm Elimination
Click
icon on the status bar to eliminate beep alarm if the alarm is activating.
Section 9
Playback/Backup
Playback
Press
,
or
in front panel to enter the search interface as show in Fig. 41.