Mechanical Installation
19
4�
Verify all four bolts are hooked securely into the end of the table to prevent damage
to the end pad or possible injury to a player.
Figure 34:
Align End Pad Bolts with Keyhole Cutouts
5�
Repeat
Steps 1–4
for the end pad at the opposite end of the table.
To remove an end pad, lift it up and pull it away from the table.
Attach Top Pads
1�
Locate one of the top pads. Each table may have one or two top pads depending
on the width.
2�
Line up the hinges on the pads with the mating hinges on top of the table.
3�
Use a small pick or screwdriver to engage both spring pins on each hinge and
connect the pad to the table. Refer to
.
Figure 35:
Top Pad Hinge
Both Spring
Pins Engaged
4�
Repeat
Steps 1–3
for the other top pad.