Daktronics ST-3170, Manual, Page: 10 / 50

Uncrating
6
7� Locate a caster base vert underneath the table, and line up the caster base with the
holes. Refer to Figure 9 .
Figure 9: Line up Caster Base Assembly with Caster Base Vert
8� Use the 5/16" Allen wrench to reinstall the red wheels from inside the caster base to
attach it to the bottom of the table. Refer to Figure 10 . Do not overtighten the bolts;
the wheels should be able to spin freely.
Figure 10: Reinstall Front Red Wheels Inside Caster Base
9� Use a T30 Torx bit to reinstall both 1/4" Torx screws. Refer to Figure 11 . These bolts act
as stops to prevent the front face of the table from tilting forward more than 90°.
Figure 11: Reinstall Torx Screws