Mechanical Installation
16
Figure 29:
Transport Mode
Adjust Tabletop Level
The tabletop supports are turnbuckle style connecting rods that will allow for fine tuning
of the tabletop to be level across its width and in relation to the floor. Refer to
• To
raise
the tabletop, rotate the turnbuckles
counterclockwise
by hand until the
desired height is achieved. Maximum adjustment is 16" pin to pin, or +1" from factory.
• To
lower
the tabletop, rotate the turnbuckles
clockwise
by hand until the desired
height is achieved.
Verify that all turnbuckles are the same overall length from pin to pin by measuring with a
tape measure. This ensures proper tabletop operation when raising/lowering.
Figure 30:
Turnbuckle Adjustment