CUT 250 COLD SAW
7/13/05
8
-When lifting the machine use a sling.
How to mount your Cold Saw on the pedestal
-Place the machine on the pedestal so that the front of the machine is facing the front of the
pedestal (see illustration 14).
Illustration 14
illustration 15
-Use the two remaining bolts (13mm x 40mm) and put a 31mm washer on it, put the bolt into the
front mounting hole (see illustration 15). Put a 31mm washer on the bottom side of the bolt, now
put the 13mm nut on the bolt.
-See picture below (illustration 16) to mount the second bolt on the rear side of the machine.
Front side of
machine
Front side of
pedestal
Front
mounting hole
Summary of Contents for CUT 250 COLD SAW
Page 19: ...CUT 250 COLD SAW 7 13 05 19...
Page 20: ...CUT 250 COLD SAW 7 13 05 20...
