Dake CUT 250 COLD SAW, Manual

Page: 16 / 22

CUT 250 COLD SAW
7/13/05 16
Noise test
In accordance with point 1.7.4f of the Machines Directive EEC 89/392
-The microphone was located close to the operator’s head at medium height.
-The equivalent continuous acoustic pressure level was 77,6dB (A).
-The maximum level of the weighted instantaneous acoustic pressure C was always less than 130
dB.
NOTE: With the machine operating, the noise level will vary according to the different materials
being processed. The user must assess the intensity and if necessary provide the operators with the
necessary personnel protection, as required by law 277/1991.
DRAWING
NUMBER
PART NAME PART NUMBER
1 MACHINE BED AGC11070
2 REVOLVING ARM AG190046
3 REVOLVING ARM PIN AFC10029
4 REVOLVING ARM LOCKING BRUSH AFC10030
5 REVOLVING ARM LOCKING LEVER AG160022
6 SCREW TCCE M8 81110080
7 ELASTIC PIN 6 82504217
8 COUNTERVICE AG940011
9 DOWEL M6 5927 81132062
10 BAR STOP ROD ANC10046
11 BAR STOP ANC10046
12 VICE AG940012
17 OILER 5 82901005
18 VICE HAND WHEEL 47100000
19 ROLL PIN 82504217
20 VICE SCREW AFC10058
23 BURR-FREE PLATE AF940081
24 SEAL FITTER SUPPORT FLANGE ANC10072
25 SNAP RING 42 82610000
26 TANK COVER FITTER AFB80043
27 FITTER SUPPORT FLANGE ANC10071
28 SCREW TCCE M5 64180
29 WASHER 82100000
30 COOLANT ON/OFF VALVE 88600000
31 COOLANT HOSE 69102002
32 SCREW TCCE M6 81110055
33 COOLANT TANK SCREEN AFB80044
34 SCREW TSPEI M8 81120074
35 NUT M8 HEXAGONAL 81600008
36 HINGE PIN 060A0010
37 DOWEL M6 5927 81132062
38 NUT M6 HEXAGONAL 81600006
40 NUT M16 HEXAGONAL 81600016