CUT 250 COLD SAW
7/13/05
3
Location of safety
Covers
-Grey metal shield covering the blade.
-Blue plastic shield covering the blade.
-Black plastic cover, covering the electrical supply box.
Electrical equipment
-According to European Standard “CENELEC EN 60 204-1” which simulates modifications,
publication (IED 204-1)
-The electrical equipment ensures protection against electric shock as a result of direct or indirect
contact. The active parts of this equipment are housed in a box so that access is limited, the screws
can only be removed with a standard screwdriver.
-This equipment is protected against splashes of water and dust.
-This machine has been tested in conformity with EN 60204.
Recommendations for use
-This machine has been designed to cut metal building materials with different shapes, profiles
used in workshops and mechanical structural work.
-Only one operator is needed to use the machine.
-Before starting each cutting operation, ensure that the part is firmly gripped in the vice and that
the end is suitably supported.
-Do not use cutting blades of a different size from those stated in the cutting capacity section (next
page).
-If the cutting blade gets stuck in the work piece, release the blade ON button immediately, switch
off the machine, and open the vise slowly. Remove the part and make sure that the cutting blade
and/or its teeth are not damaged or broken.
Summary of Contents for CUT 250 COLD SAW
Page 19: ...CUT 250 COLD SAW 7 13 05 19...
Page 20: ...CUT 250 COLD SAW 7 13 05 20...
