CUT 250 COLD SAW
7/13/05
11
-Before connecting the machine to the main power, make sure that your installation has a
disconnect box.
-The machine is not provided with an electrical plug, the customer must provide a suitable plug for
the machine. See diagram below for wire connection.
Operating your Cold Saw cut 250
-Mix the coolant that came with the machine (Trim Sol) at a 10:1 ratio, add about a half gallon of
mixed coolant in the machine bed.
-Place the material to be cut in the vice (1) and clamp the material in place by turning the hand
wheel (2) clockwise.
-Turn the power switch clockwise to the on position (illustration below).
1
2
3
Machine
bed
Summary of Contents for CUT 250 COLD SAW
Page 19: ...CUT 250 COLD SAW 7 13 05 19...
Page 20: ...CUT 250 COLD SAW 7 13 05 20...
