CUT 250 COLD SAW
7/13/05
22
This warranty will not apply to:
(a)
Units and parts which are not installed in accordance with applicable local codes,
ordinances and good trade practices;
(b)
Defects or malfunctions resulting from failure to properly install, operate, or maintain the
unit in accordance with the printed instructions provided;
(c)
Failure resulting from abuse, accident or negligence;
(d)
Normal maintenance service and the parts used in connection with such service;
(e)
Units and parts which have been altered or repaired other than by the manufacturer or as
specifically authorized by the manufacturer;
(f)
Units and parts used for purposes other than for what it was designed and manufactured.
Return of warranted components
Purchasers who notify the manufacturer in writing, within the warranty period, will be issued a
Return Material Authorization Number. Any item to be repaired or replace under this warranty
must be returned to the manufacturer, at Grand Haven, Michigan or such other place as the
manufacturer man designate, freight prepaid. The packaging used for returns must be supplied by
purchaser and clearly marked with the Return Material Authorization Number.
Repair and Replacement of warranted components:
Any item covered under this warranty will be repaired or replaced free from all charges except
authorized transportation and installation labor.
This warranty is in lieu of all other warranties and no representations, guarantees, or
warranties, expressed, implied, or statutory (included, but not limited to, a warranty of
merchantability of fitness for a particular purpose) are made by manufacturer in connection
with the manufacture of sale of its products.
The remedies set forth herein are exclusive and in lieu of all other remedies and
manufacturer shall not, under any circumstances, be liable for incidental, consequential or
special damages, such as, but not limited to, damage to, or loss of, other property or
equipment, loss of profits, inconvenience, or other incidental or consequential damages of
any type or nature. The liability of the manufacturer shall not exceed the price of the product
upon which the liability is based.
No employee, distributor, or representative is authorized to change this warranty in any way
or grant any other warranty on behalf of manufacturer.
Summary of Contents for CUT 250 COLD SAW
Page 19: ...CUT 250 COLD SAW 7 13 05 19...
Page 20: ...CUT 250 COLD SAW 7 13 05 20...
