CUT 250 COLD SAW
7/13/05
2
Accident prevention
Regulations
-This machine has been built to comply with national accident prevention regulations. Improper
use and/or tampering with the safety devices will relieve the manufacturer of all responsibility.
-Check that the voltage indicated on the plate, normally fixed to the machine motor is the same as
the line voltage.
-Check the efficiency of your electric supply making sure the machine has it’s own grounded
circuit.
-Do not operate machine without safety guards or with the electrical panel cover removed.
-Always disconnect machine from power source before changing the blade, performing
maintenance or if the machine is operating abnormally.
-Do not operate this machine without the handle and/or handle switch disconnected.
-Always wear OSHA approved safety glasses when operating this machine.
-Never put your hands or arms into the cutting area while the machine is in operation.
-Do not shift or move machine while the machine is in operation.
-Do not wear loose clothing, gloves, bracelets, rings, watches, chains or any other object
that could get caught in the machine while in operation and Tie back long hair.
-Keep the machine bed free from tools or any other object, while machine is in operation.
Summary of Contents for CUT 250 COLD SAW
Page 19: ...CUT 250 COLD SAW 7 13 05 19...
Page 20: ...CUT 250 COLD SAW 7 13 05 20...
