Dake CUT 250 COLD SAW, Manual

Page: 14 / 22

CUT 250 COLD SAW
7/13/05 14
Weekly maintenance
-Remove metal shavings from the coolant tank
-Clean and grease the screw and the sliding guide of the vice.
-Clean the blade housing
-Sharpen the blade
Monthly maintenance
-Check tightness of the screws on the motor, the pump, the jaws and safety guard
-Check that the safety shield is not broken
-Grease the head hinge pin.
Six Month maintenance
How to change the oil in the gearbox
-Disconnect machine from the power supply
-Change the oil in the reduction unit using gear lube 80/90. We recommend MOBIL SHC635 .
-
Remove the handle and the plug coming from the handle to the electric box.
-Unscrew the sight level gauge; this will drain all the oil in the gearbox. Use a bucket to catch all
the oil from the gearbox.
-When oil stops coming out of the sight level hole, screw the sight level gauge back into the hole.
-Fill gearbox with 80/90-gear oil.
We recommend SHC 635 MOBIL
when refilling the gearbox
be sure to fill only to the middle of the sight level gauge when the cutting head is sitting level.
-Screw handle back in hole and connect the Plug coming from the handle.
Oil disposal
-The disposal of oil and coolant products are controlled by strict regulations, follow local rules and
regulations to dispose of properly.
Plug coming from the
handle
Handle
Sight level
gauge
Fill hole
for oil is
the same
hole the
handle
screws
into.