Daiwha DI-6000, User Manual

Page: 37 / 78

Operation
31
5.2 Standby status (before operation)

In this status, if you press the START button in standby mode, operation is immediately
started.

With I.V Set being loaded, the pump can be changed to the standby mode by pressing the
POWER button for 3 seconds.

You can enter any status from this status.
When the Key LOCK switch is set to On, see 5.6 Key lock button function.

If no operation setting (button operations) within the time that has been set in standby
mode, a standby alarm rings and the red
LED blinks. (See 7.14 Standby alarm )

If you press the BOLUS button, injection is performed with the preset BLOUS flow rate and
volume.
Caution
 If you press the BOLUS button in standby mode, it detects the occlusion as a
purged status.
 Be careful because overdose can happen momentarily when using the BOLUS
Button.
5.2.1 Setting the I.V. Set Code
 Set the code name of the I.V Set before using it.
 In the I.V Set menu, enter password to set the code
name. (PASSWORD : 1711)
 The code name you set will be stored in internal
memory for future use.

Make sure the I.V Set matches the code name and it is
properly loaded before using.

See 3.3 Mounting I.V Set