background image

Contour Gen 2 Flex (Side Bend)

Installation Guide

www.gecurrent.com

© 2022 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the 

General Electric Company and are used under license. Information provided is subject to change without 

notice. All values are design or typical values when measured under laboratory conditions. 
SIGN299 (Rev 05/11/22)  DOC-2001572 

NOTE:  For linear long runs, center connection to the LED strip is recommended to minimize voltage drop. 

*GELP24-60U-GL minimum load = 15 ft. (4.57 m).

Maximum Loading per 24 VDC Class 2 Power Supply

Power Supply

GEXNFS32-1, GEXNFS65-1, GEXNFSRD-1, GEXNFSGL-1,  

GEXNFSBL-1, GEXNFSYG-1, GEXNFSRC-1

Rating per module

24VDC, 1.4W/ft. (Strip)

GEPS24-25U-NA, GEPS24-25-EU (CE only) 

Load shall not exceed 0.83A

15ft. (4.57 m)

GEPS24D-60U-GLX, *GELP24-60U-GL  

Load shall not exceed 2.5A

39 ft. (11.88 m)

GEPS24D-80U  

Load shall not exceed 3.3A

49ft. (14.93 m)

GEPS24-100U-GLX, GEPS24D-100U-NA,  

USVI-100024FE, USVI-100024FBA 

Load shall not exceed 4.0A

59ft. (17.98 m)

GEPS24-100U-GLX2, GEPS24-100U-TT 

Load shall not exceed 4.0A

62ft. (18.89 m)

GEPS24-200U-GLX2 

Load shall not exceed 4.0A per each (of 2) output channels

62ft. (18.89 m) per bank

124 ft. (37.78 m) per PS

GEPS24-300U-GLX2 

Load shall not exceed 4.0A per each (of 3) output channels

62ft. (18.89 m) per bank

186 ft. (56.67 m)  per PS

This product is intended solely for the use of non-residential signage lighting and is not intended for use in any other applications.

Conforms to the following standards:

Dismantling

At the end of life, the contained LED light source may be cut out using suitable wire cutters, removed from the mounting surface, 

then replaced per the cutting and installation instructions above, or dismantled and taken to a communal collecting point for 

environmentally friendly disposal in accordance with local regulations by a professional installer.

Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly 

disposal in accordance with local regulations. Contact your local authorities or stockist for advice on recycling. The packaging material is recyclable. 

Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection-service.

Power Supply  

Wattage

18 AWG/0.82 mm

2

 

Supply Wire

16 AWG/1.31 mm

2

 

Supply Wire

14 AWG/2.08 mm

2

 

Supply Wire

12 AWG/3.31 mm

2

 

Supply Wire

25W

20 ft./6.1 m

60W,  80W, 100W,  

180W, 200W, 300W

20 ft./6.1 m

25 ft./7.6 m

35 ft./10.6 m

40 ft./12.1 m

Maximum Remote Mounting Distance from Driver Ouput

Summary of Contents for Contour Gen 2 Flex










Reviews: